MCC Maintenance 0 Posted March 28, 2008 Our Club has one of these systems. The person who used to look after it has lost the PC monitoring software and our PC has died. There is no maker or supplier information in the manual. Any suggestions where I may get a new copy of the PC software? Thanks Share this post Link to post Share on other sites
Daryl733 0 Posted March 29, 2008 Our Club has one of these systems. The person who used to look after it has lost the PC monitoring software and our PC has died. There is no maker or supplier information in the manual. Any suggestions where I may get a new copy of the PC software? Thanks Take a picture of the machine and post it up here. Share this post Link to post Share on other sites
C7 in CA 0 Posted March 29, 2008 Does it look similar to this?: If not, post a picture of the front and back of the unit. Someone will recognize it I bet... Share this post Link to post Share on other sites
C7 in CA 0 Posted March 29, 2008 Yeah, what Daryl said! Share this post Link to post Share on other sites
ak357 0 Posted March 29, 2008 Does it look similar to this?: If not, post a picture of the front and back of the unit. Someone will recognize it I bet... http://computarganz.com/file.cfm?id=113 try this one Pelco DX4000 Series digital video recorder ------------------------------------------- CBC America, Intelix, Pelco 4 ch DVR all the same interesting Share this post Link to post Share on other sites
MCC Maintenance 0 Posted April 1, 2008 Can not find any makers info on the DVR its self but I have found a web site with an identical manual on it to the one I have. riasztobolt.hu/pictures/down/en_tmanual_TP-M104DR-CD.pdf However the actual front panel is not quite the same (The manual are the same) The search control buttons are rectangular in the form of a cross, 5 across and 1 up and down in the middle. Hope this is of some help. Couldent do a photo as I do not have the neccessary. Share this post Link to post Share on other sites
MCC Maintenance 0 Posted April 20, 2008 Have now got the suppleirs software, DVR 422R, but when installed and run, comes back with " Video Overlay Wasn't initialised" How can I solve this. Share this post Link to post Share on other sites
