Eyemax DVR 9000 Series System keeps giving HD Fault

[sightbeyondsight 0]

Hello All,

 

I have a 4 Channel Video Eyemax 9000 series PC card system setup in a store. I do not know much about the settings but i manage to bring the cameras up but the videos are not been record because of a HD Fault Error. Every time the Eyemax software loads it gives me "HD Fault. Replace your drive" error or something like that. Now i have a single 250 GB Western Digital HDD with 2 Partition. One is 40 GB for the OS and the reaming (about 196 GB) is for the DVR software. I tried "initializing" both partition but no success.

 

Is there something i am doing wrong.

 

Again this is very argent. Thanks in advance for you help. If you guys need more information please ask.

[coolie11 0]

Are you the end user or an installer?

[eyeonutech 0]

try running a disk check on both partitions. If that fails you will need to clone the drive to a new hard drive.

[crirvine 0]

You have a failing hard drive replace the hard drive and never use the boot drive for dvr video. If you are not sure how to do this or do not have the software and skill to setup a drv call your installer.