G22 0 Posted April 21, 2008 (edited) I am considering going on the cheap and installing my front house cam inside against the front window. It would be on angle, prob 40 degrees or so. The cam will either be a Panasonic WV-CW474AS (only cam at present) or a Panasonic WV-CP484 (hopefully). My concern is the neighbors gawking, talking, pointing etc. that they have a cam and no one else does blah blah. So I would like to be a little discreet if possible with the front cam. The back I don't care and am going to use a Pelco EH3512-2 MT housing eventually. Any issues with glare or reflection doing so? Tx. Edited April 22, 2008 by Guest Share this post Link to post Share on other sites
atropine 0 Posted April 22, 2008 I had a camera behind reasonably dark curtains looking through the glass of the window. At night all I could see was the reflection of the curtain. You'll need a lens shroud of some nature. If you have the the lens so close it's almost in contact with with the window glass it would be easy enough to exclude the light between lens and window. Share this post Link to post Share on other sites
zmxtech 0 Posted April 22, 2008 dont waste your time, even with a boot there is heaps of stuff that will make the picture poo. The sun will make it hot condensation vibrations bugs -spiders IR will be bad -reflections looks stupid ! your doing the right thing -good quality cam with a nice dome. my 2c z Share this post Link to post Share on other sites
