akiva7777 0 Posted April 22, 2008 ok, so im using cat 5 for some of my longer runs, is ther any chance that i can use the same cat 5 cable for both camera feed and power? Share this post Link to post Share on other sites
kensplace 0 Posted April 23, 2008 It would depend on the type of wire (gauge, solid core, stranded), camera power type (AC or DC), voltage (12 or 24v) power draw of the camera, and the length of the run, as these would decide how much voltage drop you would get in the cable. Share this post Link to post Share on other sites
si_kungs 0 Posted April 23, 2008 for gauge 24. how long can you run 12V power? also, running 220V can it interfere with the video signal? Share this post Link to post Share on other sites
kensplace 0 Posted April 23, 2008 It depends on the current drawn, as the higher the current, the greater the voltage drop.. 220v should not be used in cat5, it should be ran in seperate mains rated cabling, and it should not run close to (parallel) with video. Local safety/wiring codes will need to be adhered to also, for safety and insurance purposes.. Share this post Link to post Share on other sites
si_kungs 0 Posted April 23, 2008 sir do you have a formula how to compute it? so i can decide whether to add additional pair to the power. Share this post Link to post Share on other sites