libertysurveillance 0 Posted May 5, 2008 I have a Geovision P.O.S (point of sale ) machine model # is v2e that works on 8.01 or earlier. We have this new customer, he has 8 of these things set up and none of them are working. When we arrived this is how it was set up rs-232 db25 from cash reg to P.O.S rs-232 db25 from printer to pos and rj45 ethernet from P.O.S to network. Now this customer had Geo set it up for him and according to him it worked but does not now. I have the manual and have gone thru it but still cant get this thing to work I'm not familiar with this type of P.O.S machine (no pun intended) now it is hooked up to an nec cash reg that is not supported by Geo But you have to select general type in the settings if it is not recognized but keep in mind it worked for little So any info would be great i.e. (details on how you set yours up and what kind of problems you might have had and what kind of software and hardware you have used it on) Thanks Share this post Link to post Share on other sites
