griffonsystems 0 Posted May 6, 2008 heater/blower box camera housing that uses the mounting arm to feed the wires into the camera so that nothing is visible... i use sti but they dont have one like this, maybe emi but didnt see one? any suggestions?? Share this post Link to post Share on other sites
Smit9352 0 Posted May 6, 2008 heater/blower box camera housing that uses the mounting arm to feed the wires into the camera so that nothing is visible... i use sti but they dont have one like this, maybe emi but didnt see one? any suggestions?? Housing = 618HB Mount = CMB208 That's the best I got and it's a AC housing. Mount has a small hole through the bottom of it about 2inches in diameter and works like a champ. I think it would be around $50 for the combo but I could be wrong... the sales reps here always work well with pricing. How many were you needing? Thanks, John Share this post Link to post Share on other sites
griffonsystems 0 Posted May 6, 2008 does it have a port in the middle of the housing? i see the 2 on the back and the mount looks like it could feed wires through thx pg Share this post Link to post Share on other sites
Smit9352 0 Posted May 6, 2008 does it have a port in the middle of the housing? i see the 2 on the back and the mount looks like it could feed wires through thx pg Yep it does. The plastic plates in the way of seeing it tho... =( My bad, John Share this post Link to post Share on other sites