maximus 0 Posted May 31, 2008 I need help in setting my dvr avc776w to view remotely. I have no problems in my old router dlink 704p viewing in LAN and remotely. But when I replaced it with the new dlink 300, I can only view in LAN but not remotely. This is my config in my dvr network page ip. 192.168.0.40 gateway. 192.168.0.1 netmask 255.255.255.0 dns 168.95.1.1 port 80 this is my config in my dlink dir 300 DHCP enabled 192.168.0.100-200 port forward name: video server s ip address 192.168.0.40 public port 80 private port 80 traffic type tcp i hard reset the router many times and redo the config but still not successful. hope someone can give insights. Share this post Link to post Share on other sites
Kiwi 0 Posted May 31, 2008 I don't know if Video Server E is different from the "S" but those settings work fine on my home setup with a 3com router. You could try temporarily assigning the DVR to DMZ to eliminate port choice issues. Not that it's likely relevant, but it's interesting that you have used an external DNS address on your DVR. I normally use the gateway (router) so the DVR can reach whatever DNS has been currently obtained off the ISP. Share this post Link to post Share on other sites
scorpion 0 Posted May 31, 2008 I agree. _____________________________________________________________ Video Server S is used on the older DVRS, and when they started doing MPEG I believe that is when they started using Video Server E. Share this post Link to post Share on other sites