Gesualdo 0 Posted June 7, 2008 HELP!!! It has been several days and several attempts to solve the problem. I have adjusted the ir sensitivity control from one end of the adjuster to the other with no change. Took it down and bench tested ir and the dial doesn't change anything. the IR work but seems to stay the same no matter what I do and it's way to low for my small 8x12 cluttered workshop no matter what setting. I am now going to send it back for repair. I will then keep it as a spare. I really need a good suggestion for a bullet camera to replace it, with comparable specs if possible. less expensive prefered. To refresh everyones memory, I am going to be replacing an extreme EX40MNX day night camera. Spec page: http://www.extremecctv.com/pdf/productspecsheets/EX40N_TS_080101.pdf in this area: 8'wide x 20' long I am considering the Speco HEAT series Please help Thanks, Gesualdo Share this post Link to post Share on other sites
CCTVinfoguy 0 Posted June 9, 2008 try a WZ16, or WZ18 from Extreme. Better Ir range and decent Picture.. Should be lower cost as well. Share this post Link to post Share on other sites
