kizbits2000 0 Posted June 16, 2008 Ok this is annoying, I have just got a cctv camera that uses a cat5 connection that connects the CCTV Camera to a connection box that connects to a scart to plug into your tv. Now I cannot find any way of getting my camer to connect to my computer so that i can save all 0of the footage on there and veiw it live from somehwere else. I have attached a diagram of the CCTV. Please can someone tell me anyway I can connect it to my comp? It uses cat5 (A phone like connection) and plug into tv via SCART thanks Kieron ps i cant post a pic coz the forum rules say i cant Share this post Link to post Share on other sites
survtech 0 Posted June 16, 2008 Most systems like that have the power for the camera built into the monitor. What you will have to determine is which wires carry video and which carry power. Then you can obtain a female connector and attach the power wires to a power supply and the video wires to a monitor or computer video card. Watch your polarities since those cameras usually use 9-12VDC. Share this post Link to post Share on other sites
scorpion 0 Posted June 16, 2008 If your system is a Color Dual Quad Network Observation System SSC14WEB then you are in luck! http://www.samsung-security.com/Portals/0/UserManuals/SSC-14WEB.pdf RJ 12 PINOUT 1 SPEAKER (+) 2 VIDEO_OUT 3 GND 4 SPEAKER (-) 5 AUDIO_OUT/ALARM_OUT 6 12V DC Back of Camera Clip up, contacts down 123456 Ok this is annoying, I have just got a cctv camera that uses a cat5 connection that connects the CCTV Camera to a connection box that connects to a scart to plug into your tv. I hope the info above helps you. Now I cannot find any way of getting my camer to connect to my computer so that i can save all 0of the footage on there and veiw it live from somehwere else. The camera does not hook up to a computer! Share this post Link to post Share on other sites