peskywinnets 0 Posted July 13, 2008 Hi there, My workplace are decommisioning a whole load of quality British 12V PSUs - I reckon I can raise a few bob by selling these. One potential market is the CCTV world. The problem is that the PSU's present DC output cable has an abnormal connector on it - a PC 15Way D type....so I'll obviously have to change this for a stnadard 12V DC connector....therein lies the problem, it appears there's no such thing as a standard 12V connector! What I've gleaned is that there tends to be two types of DC connector used when it comes to 12V PSUs..... an end with a hole that has a diamter of 2.1mm or a hole with a diameter of 2.5mm. Does anyone have enough experience of CCTV installs to know which one is used the most? Share this post Link to post Share on other sites
cachecreekcctv 0 Posted July 13, 2008 I normally use the 2.1mm almost all the time. Most of the 12vdc cameras I buy, also have the same size fitting already wired in . They would be pretty easy to change over, though. I normally purchase them in pairs ( male and female to match). Share this post Link to post Share on other sites
Smit9352 0 Posted July 14, 2008 I normally use the 2.1mm almost all the time. Most of the 12vdc cameras I buy, also have the same size fitting already wired in . They would be pretty easy to change over, though. I normally purchase them in pairs ( male and female to match). 2.1mm DC plugs are what we use also, we sell them in case customer do not want to cut the wires on the camera (warranty purposes) so they plug those male plugs in and run their wire to those. Thanks, John Share this post Link to post Share on other sites
normicgander 0 Posted July 16, 2008 2.1mm x 5.5mm is most popular for mini domes and bullets.... Share this post Link to post Share on other sites
peskywinnets 0 Posted July 20, 2008 Many thanks for the replies - I'll order up a load of 2.1mm x 5.5mm diameter. Share this post Link to post Share on other sites