kalpesh_nikumbh 0 Posted July 14, 2008 Hi, Could some one help me in installtion of Speed dome camera in rainy area. I have installed one such camera in IP66 housing. Whenever there is rain fall... water droplets blogs on the dome cover from inside & outside ..... Due to Humidity in Air & heat generating inside the Dome due to electronic components inside ....it generates foggy envirnment inside ...i could solve this using desiccant bag . Now my worry is the water droplets on outside ..... i could not use wiper since it's a dome shape... Any one phased and implemented any solution for this ?? pls. let me know.. Regards, Kalpesh. Share this post Link to post Share on other sites
Smit9352 0 Posted July 14, 2008 It generates foggy environment inside ...i could solve this using desiccant bag. Kalpesh. Solve the inside with that then goto the outside and use Rain-X on the outside or a product like it. Where the position is you can't put something above it to get rain further away from it when it falls? Thanks, John Share this post Link to post Share on other sites
kalpesh_nikumbh 0 Posted July 24, 2008 thanks John!! Rushed with solution...but unfortunatly its not raining since then !! could not able to check the result!!! Rain-x is eazily available here india at Petrol pumps (HPCL) Regards, Kalpesh Nikumbh India Share this post Link to post Share on other sites
Smit9352 0 Posted July 24, 2008 thanks John!! Rushed with solution...but unfortunatly its not raining since then !! could not able to check the result!!! Rain-x is eazily available here india at Petrol pumps (HPCL) Regards, Kalpesh Nikumbh India Or you could always make a shield that is hanging over it but that only resolves falling rain and not wind. Goodluck and let me know, Thanks, John Share this post Link to post Share on other sites
