SOME ONE HELP ME REMOTELY ACCES MY CAMERAS

[cybernettaxis 0]

PLEASE SOME ONE HELP ME WITH SETTING MY CAMERAS UP SO I CAN VIEW THEM REMOTELY OVER THE WEB FROM SOMEWHERE AS I HAVE POLICE WHO WOULD LIKE TO SEE WAHTS GOING ON WITH A NEIGBOUR WHO IS AN EX DRUG DEALER UP TO HIS OLD TRICKS AGAIN.

 

I HAVE SET UP A ACCOUNT WITH DYNDS AND NOW I CAN VIEW MY CAMERAS ON MY OWN NETWORK O ANY OF MY PCS ON THE SAME NETWORK I JUST NEED TO BE ABLE TO DO THE PART WHERE THEY CAN BE ACCESSED OVER THE INTERNET ANYWHERE USING MY PASSWORD AND USERNAME.

[RickA 0]

Have you set up portforwarding on your dvr? Does your DVR require you to use a client software to view?

[cybernettaxis 0]

Have you set up portforwarding on your dvr? Does your DVR require you to use a client software to view?

 

ALL I KNOW IS I HAVE AVEMEDIA DVR CARD AND AVERMEDIA NV3000 SOFTWARE

 

IN THE SET UP IN THE NETWORK AREA OF THE SOFTWARE I HAVE MY COMPUTERS STATIC IP AND IT SAYS WEB PORT 80

REMOTE CONSOLE PORT 5500

AND THEN DYNAMIC DNS

 

I HAVE BEEN TO MY ROUTER AND SET UP A SERVICE CALLED CCTV AND SET IT TO PORT 80 AND THEN ON THE FIREWALL RULES IN THE ROUTER ADDED THE SERVICE TO ALLOW ALWAYS AND IN THE SETTINGS PUT IN THE COMPUTERS FOR WHICH THE CAMERAS ARE RUNNING FROM THE IP NUMBER.

[RickA 0]

What about port 5500 for remote?

[cybernettaxis 0]

What about port 5500 for remote?

 

 

THATS WHAT ITS SAYING ON MY NETWORK SETTING OF THE AVERMEDIA SOFTWARE

MAIN CONFIGURATION REMOTE CONSOLE PORT 5550

THATS WHAT IS SELECTED 5550

[cybernettaxis 0]

What about port 5500 for remote?

 

 

THATS WHAT ITS SAYING ON MY NETWORK SETTING OF THE AVERMEDIA SOFTWARE

MAIN CONFIGURATION REMOTE CONSOLE PORT 5550

THATS WHAT IS SELECTED 5550

 

I BEEN IN MY ROUTER AND SET UP A SERVICE FOR CCTV AND GAVE IT PORT 80

 

THEN ALLOWED IT IN MY FIREWALL RULES, AND PUT THE IP ADDRESS OF THE PC THE DVR CARD IS INSTALLED IN TO THE SERVICE OF THE CCTV

[cybernettaxis 0]

What about port 5500 for remote?

 

 

THATS WHAT ITS SAYING ON MY NETWORK SETTING OF THE AVERMEDIA SOFTWARE

MAIN CONFIGURATION REMOTE CONSOLE PORT 5550

THATS WHAT IS SELECTED 5550

 

I BEEN IN MY ROUTER AND SET UP A SERVICE FOR CCTV AND GAVE IT PORT 80

 

THEN ALLOWED IT IN MY FIREWALL RULES, AND PUT THE IP ADDRESS OF THE PC THE DVR CARD IS INSTALLED IN TO THE SERVICE OF THE CCTV

 

 

 

WHAT DO I DO NEXT SO THEY CAN BE ACCESD ANY WHERE ON THE NET

[RickA 0]

You need to port forward 5550 or 5500 whichever it is on your router also.

[Smit9352 0]

 

Also it seems like your ports aren't forwarded properly.

 

http://www.canyouseeme.org/

Check there and make sure your ports are forwarded.

 

What type of router are you using?

[RickA 0]

Have you gotten this set up and working yet? Did you check out the port forward site? how about the sticky on port forwarding?