DVRNET REMOTE CLIENT NOT REFRESHING

[vinod 0]

I have installed 4 channel kodicom DVR at my office and wathing it on my pc at home.

recently i purchased a new sony vaio laptop with ati radeon x2300 graphixs

my dvr client software is working but it has a peculiar problem it dosnt refresh the images automatically. if changes the images only if i click on it.

the same works on a older laptop (hp6120)without any images issues.

 

 

vinod

[destro_23 0]

let me guess... you have vista

 

 

i'm unalbe to install my DVR remote software on 3 vista boxes... i was able to install it on a 4th after i disabled UAC and ran everything as administrator.

 

On my vista laptop i gave up an installed VMware and Run windows XP in a box and watch that way..

 

Gotta love Vista

[vinod 0]

i even installed vmware and installed xp on it still i got the same refreshing problem. then i formated the sony vaio and installed xp on it but to no use still the client softwar was not refreshing the images . my laptop configuration is core2 duo 2 GB Ram and ATI X2300 graphics 256 mb . i read somewhere that x series card is not supported by kodicom dvr card on the server end.

[doyo 0]

Could it be the internet connection or bandwidth issue?. You said it worked fine on your other laptop; was it connected in the same network area as your new Sony laptop?

[destro_23 0]

i even installed vmware and installed xp on it still i got the same refreshing problem. then i formated the sony vaio and installed xp on it but to no use still the client softwar was not refreshing the images . my laptop configuration is core2 duo 2 GB Ram and ATI X2300 graphics 256 mb . i read somewhere that x series card is not supported by kodicom dvr card on the server end.

 

now that i think of it and you mentioned video card.. i had an issue a while ago with the video card... try swapping out the video card for a different one... maybee older PCI-E card.. i just picked up a ATI 95xx for $70 and that fixed my issue on that box

[vinod 0]

i used the same internet connection (airterl braodband 128 kpbs)for the laptop and the pc. i dont use any switch or hub just the direct braodband adsl modem line. same internet connection with a old hcl laptop with intel graphics chipset worked very fine. I dont understand why the images are displayed but do not change (refresh automatically).

 

my dvr card works very fine. i face problem when i connect from a remote site with my new laptop (sony vaio with ATI x2300 256 Mb Graphiocs)

[doyo 0]

Then it must be the video card as destro_23 mentioned. If you give me your IP address I can try to connect from here and see what happens. I use ATI X1650.

[destro_23 0]

I"m sorry... I was actually talking about the PC that you have the DVR installed on... what kind of video card does it have?

[kalpesh_nikumbh 0]

1st : Recommonded Video resolution is 1024 x 768 32 bit.

2nd : problem with the video memory!!

 

view single camera at a time and check whether same proble persists..if no prob.s proble is no.2 ; u can increse it thro' CMOS setup

 

what i faced with kodicom.

 

kalp.