sportmotor 0 Posted August 24, 2008 I want to display monitor A with 4 cameras & monitor B with only 3 cameras. I am using a BNC T-joint to loop the DVR monitor display output to A & B monitor, but my aim is to have 4 cameras in A and only 3 cameras in B. Is there any solution? Share this post Link to post Share on other sites
sportmotor 0 Posted August 24, 2008 appreciate if anyone can have such solution to my aim. thanks Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted August 24, 2008 I want to display monitor A with 4 cameras & monitor B with only 3 cameras.I am using a BNC T-joint to loop the DVR monitor display output to A & B monitor, but my aim is to have 4 cameras in A and only 3 cameras in B. Is there any solution? What will help if you tell us which DVR are you using? Some DVRs have what is called "Spot" outputs, that allows you to feed video and extend to different monitors... If nothing else, then you can use two different video quads... basically take the looping outputs of each four ports, feed it to the quad and take the output of this video quad to a separate monitor... Share this post Link to post Share on other sites
