dmor 0 Posted September 2, 2008 What is that referencing, and where do you get that info from. I would like to post my PC but don't know what is being referenced there. regards Share this post Link to post Share on other sites
Smit9352 0 Posted September 4, 2008 What is that referencing, and where do you get that info from. I would like to post my PC but don't know what is being referenced there. regards FPS is frames per second. For a computer that can also be ... First Person Shooter (different subject). But as far as FPS for a computer the Frames it's referring to is how good is it's framerate under a large amount of stress. Best site I've found to explain all of this to someone is http://www.100fps.com/. Great site! Share this post Link to post Share on other sites
dmor 0 Posted September 4, 2008 Thanks for the site and the reply, however my question was not regarding the def. of fps, I just want to know were is it that you guys go to to read the fps numbers where they are later used to gauge how well the computer set up is doing. For example, when I (remotely)use Multiview, and based on the resolution I use for viewing a camera I can see on the lower bottom right hand corner the live info that includes kbs/s, fps and others. This to me is on a remote system, do the numbers I am looking at reflect what the server system is capable off? Is this how you gauge the system or is there another way? In addition, the folks that have listed the pc's they are using in that post also list their FPS. Where does that number come from and where do you find it? regards Share this post Link to post Share on other sites
Smit9352 0 Posted September 4, 2008 In addition, the folks that have listed the pc's they are using in that post also list their FPS. Where does that number come from and where do you find it? regards Sorry... I guess I'm not sure where you've seen this posted here concerning the fps. If you want to see a pc's fps www.fraps.com shows you a recording software that will give you a display of your fps in the bottom right corner. I apologize but I felt that was what you are looking for can you show me where this was so I can point you in the best direction I can think of. God... I hope scorpion don't see that I have failed you! Share this post Link to post Share on other sites
dmor 0 Posted September 4, 2008 In addition, the folks that have listed the pc's they are using in that post also list their FPS. Where does that number come from and where do you find it? regards Sorry... I guess I'm not sure where you've seen this posted here concerning the fps. If you want to see a pc's fps www.fraps.com shows you a recording software that will give you a display of your fps in the bottom right corner. I apologize but I felt that was what you are looking for can you show me where this was so I can point you in the best direction I can think of. God... I hope scorpion don't see that I have failed you! http://www.cctvforum.com/viewtopic.php?t=8059 Take a look at this post. Most replies are listing the FPS. Share this post Link to post Share on other sites
dmor 0 Posted September 8, 2008 I guess none of you that have listed the fps from their tested PC's know where the numbers came from? Share this post Link to post Share on other sites
Smit9352 0 Posted September 9, 2008 I guess none of you that have listed the fps from their tested PC's know where the numbers came from? Why not post in the thread asking? (Now that I know what you're referring to) I think that FPS is showing what each camera is recording at and being viewed as. There's a frame rate that the cameras can be viewed at and I think their simply listing it. Thanks, John Share this post Link to post Share on other sites
rory 0 Posted September 10, 2008 I guess none of you that have listed the fps from their tested PC's know where the numbers came from? FPS can either be set manually for each camera *max fps* or in the case of that thread it is possible they are just listing the total specified fps for that card. Share this post Link to post Share on other sites
snyder 0 Posted November 5, 2008 Has anyone ever gotten the more than 10 FPS accross 16 cams with a GV-1480 because I have not even come close. I have several setups. 1)intel 945 chipset, 2.4ghz core 2 duo 533FSB, 2GIG DDR2 533mhz, 500GB SATA2 2) intel 965 chipset, 2.4ghz core 2 duo 800FSB, 2GIG DDR2 800mhz, 1TB SATA2 2) intel G31 chipset, 3.0ghz core 2 duo 1333FSB, 2GIG DDR2 800mhz, 1TB SATA2 x 4 I even tried the PCIe GV 1480.. Never has it looked like more that 5 FPS. I tried letting the system manage the frames and I also set the max FPS and nothing improved about what looks like 5FPS at best. Anyone have better luck than me? Share this post Link to post Share on other sites
Guest Posted November 6, 2008 You can have a look at this table when using Mpeg4ASP, this is theoretical max output you get from the Geovision cards. The testing was done some years ago, so it may have change since then but it will give you an idea anyway! http://www.cctvforum.com/viewtopic.php?t=7223&highlight= If you want realtime/fullmotion they have the GV-2008/2004 cards! Best Regards JD Has anyone ever gotten the more than 10 FPS accross 16 cams with a GV-1480 because I have not even come close. I have several setups. 1)intel 945 chipset, 2.4ghz core 2 duo 533FSB, 2GIG DDR2 533mhz, 500GB SATA2 2) intel 965 chipset, 2.4ghz core 2 duo 800FSB, 2GIG DDR2 800mhz, 1TB SATA2 2) intel G31 chipset, 3.0ghz core 2 duo 1333FSB, 2GIG DDR2 800mhz, 1TB SATA2 x 4 I even tried the PCIe GV 1480.. Never has it looked like more that 5 FPS. I tried letting the system manage the frames and I also set the max FPS and nothing improved about what looks like 5FPS at best. Anyone have better luck than me? Share this post Link to post Share on other sites
ezCCTV 0 Posted November 10, 2008 When you cannot get more than 10FPS per camera, what resolution are you recording in? Share this post Link to post Share on other sites