jturner67 0 Posted September 4, 2008 Hi, I am new to this forum. I have a problem with my DVR falling offline after 1-2 days. My system setup: Gadspot DVR>Belkin Router (Port 80)>westell modem (bridge mode)>dyndns host I use the dyndns updater. Everything works fine for a while and then it is completely unaccessible. The only fix is to reboot the DVR. I am not sure what to do about it. Really annoying since I am on the road a lot. Please advise. Share this post Link to post Share on other sites
cctv_down_under 0 Posted September 5, 2008 Is the dvr set to DHCP, can you run the web serving app as a service so you can be notified when it drops out, does your ISP change latent connections and block streaming out after prolonged use? Share this post Link to post Share on other sites
jturner67 0 Posted September 5, 2008 cctv_down_under, I will check this weekend when I get home (on the road until tomorrow night). Thanks for reply. Share this post Link to post Share on other sites
jturner67 0 Posted September 9, 2008 My wife rebooted the DVR last Thursday. I was fully expecting it to go offline over the weekend and I would then try to test communications ie. open port status, router, modem, etc. . Strangely, it has been fine since then. I run the DVR as Static. I do not run it as a service but I am interested in doing that. As far as the Latency issue, I assume that is not an issue since it has been up for 5+ days. I am still puzzled as to why it was going offline every 1-2 days and why it has now stayed online for 5+ days. Thoughts anyone? Share this post Link to post Share on other sites
cctv_down_under 0 Posted September 9, 2008 Is it possible that you may have some camera inputs turned on that dont have camera feeds...some dvr's reboot to try to pick up a missing signal...what DVR is it? Have you looked in the MS Event Viewer for the reboot info? Share this post Link to post Share on other sites