Avtech 760 with PTZ Help

[melamed 0]

I have an avtech 760 and a PTQ3 camera. I know the camera works and just had the 760 replaced but cannot remember how to setup. I have

 

no 3

Device PTZ

ID 3

Protocol P-D

Baud 2400

 

Is there anything else I have to setup?

thanks

David.

[scorpion 0]

http://scorpiontheater.com/cpcamtechsupport.aspx

 

It looks like you have everything setup.

 

Is it not working?

 

___________________________________________________________

Ans:

1. Connect: 1.PTZ control 2.Power 3.Video

BROWN TO RED RS485-A

ORANGE TO GREEN RS485-B

 

2. If PTZ control is still unavailable as the connection shown in Step 3, the telephone line might have

wire jumping. Please change the connection shown in Step 2 as follows: Brown to Green, and Orange to Red.

 

3. Setup: After connecting all devices, DVR remote setting is as follows:

 

REMOTE

TITLE DEVICE ID PROTOCOL RATE

01 CAMERA 000 NORMAL 02400

02 CAMERA 000 NORMAL 02400

03 CAMERA 000 NORMAL 02400

04 CAMERA 000 NORMAL 02400

05 CAMERA 000 NORMAL 02400

06 CAMERA 000 NORMAL 02400

07 CAMERA 000 NORMAL 02400

08 PTZ 000 NORMAL 02400

 

4. Enter ID setting: If the connection is successful, DVR will detect PTZ ID number.

 

SET ID

CURRENT ID 000

SET ID 000

SET OK

[BurstElement 0]

Point 4 is only relevant if you are using an AVT camera... also the protocol should be "PELCO" as the "NORMAL" protocol is the AVT protocol.