Jump to content
elbruceo

power supply needed for a AV TECH 777

Recommended Posts


Is it not marked on the back panel? I would assume it's the same 19VDC many other Avtech's use, need at least 45 watts. A 19V power pack typically used for a Dell notebook should work with the correct plug installed.

Share this post


Link to post
Share on other sites
Is it not marked on the back panel? I would assume it's the same 19VDC many other Avtech's use, need at least 45 watts. A 19V power pack typically used for a Dell notebook should work with the correct plug installed.

 

Thanks for the info

this unit has an 8pin din plug with no voltage info so I could use the pin out if any can find them or point me the way to go

Share this post


Link to post
Share on other sites

http://www.weclonline.com/tchi/productdetail.asp?id=50122822

 

12 Volt 3 Amp 5 Volt 6 Amp

 

For AVC774, 776

 

Suitable for AVC777, 774

_____________________________________________________________

 

http://www.gx-security.co.uk/tech-ake551psu-channel-power-supply-p-941.html?manufacturers_id=36

 

_____________________________________________________________

 

http://www.watt-power.co.uk/catalogue/watt-dual-output-adapter-jentec-jta0409-p-581.html

Share this post


Link to post
Share on other sites

Did you ever get the pinout of the power supply plug? I have one of these also and need a power supply. I have a supply that puts out 12v and 6v, but I need the pinout so I can make it work.

 

Thanks & God Bless,

Glenn

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×