Eyemax dv-9120 REMOTE USER SETUP

[james_kang 0]

I am trying to setup remote viewing over the internet, but I don't have a manual or guide. Can anyone help?

[coolie11 0]

How are you trying to view?

Web Browser or Client?

 

You need to forward the ports for the DVR.

 

Default Ports are :-

 

Web 80

Client 9091-9112

 

These can be changed under Control\Setup\Network

[Evrol 0]

I am trying to setup remote viewing over the internet, but I don't have a manual or guide. Can anyone help?

 

 

WHAT ARE YOU HAVING PROBLEMS WITH? LET ME KNOW IF YOU JUST NEED THE MANUAL

[james_kang 0]

The static ip address that was being used is not accessible over the internet. Is there some way to verify the static ip address? How do you setup the static ip address?

[coolie11 0]

In The DVR Software go to :-

 

Control (Bottom Right)

\Setup (Top Right)

\Network (5th Tab from the Right)

 

Select Web Login Required (Green Check Mark)

 

Click on 'IP Address Setting ' Button

 

This will open a window for your Network

Connections.

 

Right click Local Area Connection and then select Properties.

 

In the Local Area Connection Properties Window:-

 

Select - Internet Protocol (TCP/IP) and click Properties.

 

In the Internet Protocol Properties Window you can set the IP Address to Static by selecting {Use the following IP address} {Use the following DNS server addresses}

 

For the DNS Server input the default gateway address for Preferred DNS server.

 

That's it your done.

 

Make sure you use an IP Address that's not already in use.

 

If you want the Manual, PM me your E-mail Address and I'll send it to you.

Or Contact Tech Support and they will direct you to the download location.

 

P.S. What version Software are you using? Are you an End User or an Installer?

[jnoll 0]

Can you send me the link to the user manual for the eyemax-DV-9120