Todd 0 Posted October 11, 2008 Built a new system: GV-1480 V8.2 Gigabyte GA-G31M-S2L motherboard with Intel GMA3100 onboard graphics. Intel E7200 2 gigs ddr2800 ram Plugged into my existing cameras that have been hooked into a gv1000 using 6.0 software. The video is much smoother than the GV1000 I have in place. But.. When viewing a single camera (#1), the video is shimmering or looks shakey. I cannot enable direct draw overlay, or it's grayed out. Any ideas? I'm thinking the onboard graphics are not good enough. I thought I had used this onboard graphics with versions 8.1 or lower software and didn't have any issues. Suggestions and thanks. Share this post Link to post Share on other sites
Todd 0 Posted October 11, 2008 A little more goofing around. Found if I disable DSP the shimmering goes away but the video is not as smooth. It's incredible how good it looks with the DSP turned on but anywhere there is a lot of light or even looking down at a row of pegboard hooks from the top, they seem to shake. With it off, that goes away but the video is nowhere as smooth. Anyone work with this yet? Share this post Link to post Share on other sites
