Ozcar 0 Posted October 12, 2008 Hi, I´ve been having a problem with a Divis card I just bought. I installed all as the user's manual says, I set the space for the DB, but when I try to set the cameras they don't show up at all. The camaras are working properly, because I tried them using a converter to see them working on my TV. And when ever I try to run DVR Main program I get a message that says: "Overlay fail to open" and then it closes itself... Any ideas? Thanks for your time. Share this post Link to post Share on other sites
ClosedCircuitCom 0 Posted October 13, 2008 sounds like you have an incompatible video card. try using an ATI video card Share this post Link to post Share on other sites
cgalvez 0 Posted October 21, 2008 If you are using the 4channel version (2xcap3004 or something like this) then you can get into the DVR SYSTEM folder, and look for a app called "start.exe" there you can modify YUV or RGB way of capture (choose RGB since its more friendly) if you bought an CAP120N16 (or something from the LIVCAP family), you need to buy an accelerated graphics card (ATI / NVIDIA) and look for the right drivers, once i had a problem with the latest drivers, but found that the oldest version available did the job. Good Luck Share this post Link to post Share on other sites
