adie21085 0 Posted October 17, 2008 hi, im a complete new user to any sort of technical info, so il try and explain what i need help with. Im using a cop security dvr which is linked to all my tvs, and im attempting to access it via my computer. the company which installed the system did a half ass job, so im trying to finish it. its linked to my router so now im trying to access it through netviewer on my computer, its plugged into the LAN port on the dvr. Im not interested in accessing it via the internet, just on my computer but the message i keep getting in 'socket connect fail' etc etc. AV PORT: 5000 COMMAND PORT: 5001 AVI CODEC: MICROSOFT VIDEO 1 VIDEO TYPE: NTSC OR PAL can anyone please help me! regards Adrian Cawley Share this post Link to post Share on other sites
alyeti 0 Posted October 25, 2008 (edited) you sure youy using right software? i have a cop also and it uses something called oh just got mind blank, avviewer maybe or something like that.............. ok i remembered what it was ajp player is the software Edited October 26, 2008 by Guest Share this post Link to post Share on other sites
ashmj 0 Posted October 26, 2008 can you ping the device. Some of these devices you can access through internet explorer. ie h**p://192.168.0.200 You could try that. Also is the device and your router on the same IP range. most of these dvr's don't use DHCP so you manually have to assign an IP to the DVR. just a thought, good luck Share this post Link to post Share on other sites
mr.surveillance 0 Posted October 26, 2008 Are you using a router or going directly to the computer? If you are using a router be sure to forward the port & ip address. If you are going directly into the computer be sure to use a crossover cable. Share this post Link to post Share on other sites
adie21085 0 Posted October 27, 2008 yea im using it via a router. Using a program called netviwer. This is the thing, the guy who set it up said i may need a fixed ip so it could use the same one, how can i do this? how do i forward the port and ip address? apologies in advance for me being ****!lol Share this post Link to post Share on other sites
bob332 0 Posted November 2, 2008 you are getting lan and wans mixed up, or some of the info here is. if it is all on the router side, as in inside your home or office, it is on the lan, and should have an ip address that is like 192.168.x.x or 10.0.x.x. i am not familiar w/ your particular device, but many dvrs i have seen let you put in the info for it to be a static ip, just put it up high so the dhcp server in your router doesn't try to give out its ip address. there should be a networking area in the menus. being on the lan side, there would be no reason to forward ports, that would be only if you were going to be viewing the data from the wan (internet) side from outside your location. what router do you have? Share this post Link to post Share on other sites
bazzeroo2003 0 Posted February 17, 2009 Hi Don't know if you ever got sorted but i have the same problem I have a BT Internet router with an ethernet switch which is working ok for my printer and lighting up properly for my DVR On the cop DVR menu it has an IP of 192.168.01.09 8000 when i do the request ip it comes up with 192.168.01.75 none of these work what is the password it is looking for is it the DVR password default admin & 1 or is it the network password? Tried allsorts but cannot connect any suggestions pls Share this post Link to post Share on other sites
