ipguy 0 Posted October 22, 2008 Hello, I am trying to Converting Vivotek PZ6112 into analog. I tried it with the RX7101 but that only supports the PZ7000 series. Does anybody know how I can convert this camera into analog mode. I am using a divis card with 7 analog cameras and I want my vivotek to be recorded with the divis software as well. Share this post Link to post Share on other sites
BillD 0 Posted October 22, 2008 The PZ6112 has an A/V out (line level). The camera comes with a cable that plugs into this port and splits out the audio and video on seperate RCA jacks. The yellow one is video. If you use a BNC to RCA connector you should be good to go. Share this post Link to post Share on other sites
ipguy 0 Posted October 22, 2008 Perfect. it works now. Thanks Share this post Link to post Share on other sites
ipguy 0 Posted October 28, 2008 Okay So I got thatworking but is there any way I can get the audio in as well with the DVR. How would that work, I tried running splitter cable to where one would go into the Video DVR and the other into Audio dvr, but it is not working. Does anybody know what I am doing wrong Share this post Link to post Share on other sites
IP-Pro 0 Posted November 4, 2008 Doesn't the camera come with an adapter that plugs into the AV out? It then splits off to video and mono audio? Share this post Link to post Share on other sites
Smit9352 0 Posted November 5, 2008 Doesn't the camera come with an adapter that plugs into the AV out? It then splits off to video and mono audio? Correct, but I'm not sure if he's trying to run just one cable and get the audio/video or if he's willing to setup that cable for the audio. Either way he should be able to obtain the audio. Thanks, John Share this post Link to post Share on other sites
GDC 0 Posted November 11, 2008 Easy option would be a hybrid DVR card with IP software such as NUUO Share this post Link to post Share on other sites