chap@shastasoft.com 0 Posted October 24, 2008 I have a new DS2 which I just installed at a clients home Oct 2008. Works great, but can't seem to get Pelco-D protocol out of it. Only pelco-P. Is this right? Pelco -d is everywhere! TIA, Chap Cory Share this post Link to post Share on other sites
sam10693 0 Posted November 1, 2008 Hi I think you get pelco d out of the serial telem port hope this helps best regards Sam. Share this post Link to post Share on other sites
Michelangelo 0 Posted November 3, 2008 According to the manual you only have Pelco P and not D. But you also have some other protocols. What options do you have whith your camera? Share this post Link to post Share on other sites
chap@shastasoft.com 0 Posted November 3, 2008 They are 2 Pelco PTZ domes, One Ademco ptz. The pelcos are now working over coax protocol (had to pullem down and reconfigure) so they are fine. The ademco supposedly supports d, p , and "Ademco" VCL? But it is spitting out serial garbage like crazy on the RS422 wires. So i may have a wiring problem. Thanks for the help. chap Share this post Link to post Share on other sites
