cellrepairus 0 Posted October 27, 2008 ok, it happens sometimes, u foget you password, just got 2 expensive blackberry's missing from our retail store, when i went to reset(REWIND-2-ENTER) while powering it, it didnt work, tried many times, no luck. thnx for help. Share this post Link to post Share on other sites
scorpion 0 Posted October 27, 2008 I will send you a PM for a quick work around. or you can do a Hardware reset http://scorpiontheater.com/reset.aspx Share this post Link to post Share on other sites
cellrepairus 0 Posted October 28, 2008 thnx, got it finally reset, i think i goofed again , it is a NUBIX 4ST, i shorted out the 2 jumbers (J2), but i actually had to wait more than 10 seconds while powering up, i waited till it completely rebooted and then the DVR booted by itself, then the password was reset. Share this post Link to post Share on other sites
scorpion 0 Posted October 28, 2008 I love the Nubix 4ST. It is a nice machine with the upgrades. Share this post Link to post Share on other sites
cellrepairus 0 Posted April 3, 2010 Model: Nubix 4ST it went crazy yesterday when it started to rotate the all the channels, and the front panel wont respond at all. i hard reset (shorted the 2 pins) it but it now got worse, just blue screen time to retire??? Thanks Share this post Link to post Share on other sites
scorpion 0 Posted April 4, 2010 I would want to know if the external power supply was putting out the correct voltage and tested under load, and then I would check the internal power supply for the correct voltages. I am thinking that you have a power supply problem, or your hard drive is about to go, and it is sucking up all of the power causing these odd issues. I truely do not know what is wrong with your unit, but it needs to be benched at a repair place. Share this post Link to post Share on other sites
forbestech 0 Posted February 23, 2015 thnx, got it finally reset, i think i goofed again , it is a NUBIX 4ST, i shorted out the 2 jumbers (J2), but i actually had to wait more than 10 seconds while powering up, i waited till it completely rebooted and then the DVR booted by itself, then the password was reset. how do u locate the jumbers Share this post Link to post Share on other sites
forbestech 0 Posted February 23, 2015 how do you locate the jumpers in the nubix 4 serial or model number nu-x4-g07-0161 to hard reset password Share this post Link to post Share on other sites
forbestech 0 Posted February 23, 2015 I will send you a PM for a quick work around. or you can do a Hardware reset http://scorpiontheater.com/reset.aspx how do you hard reset nubix 4 Share this post Link to post Share on other sites
