AndyNWL 0 Posted October 29, 2008 Hi all, i've just done a quick search and can't find anything to help me so i thought i may as well start a new thread. basically, i have set up my PTZ camera to watch over our back yard (PTZ position 1), and when when the camera detects movement it automatically goes to a set position (that is zoomed in on the back gate (aka PTZ position 2) However the camera then stays zoomed into the back gate (position 2) until someone manually resets the alarm in the software. is there any way i can set the software so that the camera stays zoomed in on the back gate for an example of 10 seconds and then go back to watching the entire back yard again (PTZ position 1)? the model is the SA6416 and i believe the version of the software is SA6000E Recover 040CC2F1-A26 Share this post Link to post Share on other sites
WendyWei 0 Posted October 30, 2008 Dear customer, Can I know in detial of your software version, you can find the software version by following, 1. Click the Exit button 2. Click on about button 3. You will find detailed version as 7.1.x.xxxx or 7.3.x.x.xxxx for example. Could I confirm which country are you in and sorry to bother have you consulted your local distributor and what is their feedback? Share this post Link to post Share on other sites
