Cannot access cam setup menus via Panasonic controller

[G22 0]

I am testing an old Panasonic WJ-HD500A DVR. I am also using a Panasonic WV-CU360C controller. I cannot access the cam setup menu via PS-DATA (up-the-coax) when I press the CAM SETUP button on the controller. I can access the setup menu of the DVR fine when I press the SETUP button beside the CAM SETUP button however. I believe the PS cables are 'terminated' fine on each end. I also have the test camera connected within the 1st 4 ports of the DVR, which as I understand it have the Data Mux feature enabled on ports 1-4. I could access the cam setup menus fine though before when using an Aver EB1304 DVR + Panasonic Data Mux WJ-MP204C.

 

Another thing I noticed with the DVR... I get faint black horizontal/vertical lines for about 3 minutes or so when 1st turning the DVR on. It does not seem to be the connections/cables/camera b/c I connected to another DVR (EB1304 above) right away and all was well on the monitor.

 

Any ideas?

 

Thx.