peskypete 0 Posted November 21, 2008 Trying to view over a LAN. The host has got WEBCAM enabled on the cofig page, but I get no video when I access the computer from another on my network. The manual also goes into setting WEBCAM settings by referring to WEBCAM settings under the Network tab - don't show up on V8.2, just mave TCP and Multicast settings there - confused! http://www.members.shaw.ca/soccer/ Share this post Link to post Share on other sites
peskypete 0 Posted November 21, 2008 Ok, finally found a help pdf on the Geovision site, so the Webserver should be set up properly now. I still don't see anything locally, when I plug in the local address (192.168.0.105). I get the log in screen, then I get the same screen as the link shows. I have the ports opened up and verified. Maybe I cannot access locally? Can someone try http://70.68.44.228:80 for me please? If anyone knows whether you can access on a lan, please let me know! Cheers Pete Share this post Link to post Share on other sites
peskypete 0 Posted November 21, 2008 So I enabled jpeg in teh webcam settings and now when I log in from the other computer, I am able to see one camera - woot! However.... I have TWO. Selecting Mpeg Encoder Viewer seems to be the prolem here. I'm suspecting I need to install an activeX or local program to view using mpeg. When I select the Download button, the top item only shows an Icon and 'Codec' under the Name tab. Ok! Found the solution! I guess I downloaded the ActiveX control successfully, but I needed to go to IE options and enable it from there - it was listed in the 'Disabled ActiveX' section. Now we're cookin'!! Share this post Link to post Share on other sites
