Please Help identify this card

[jay415 0]

I have a 4 channel CCTV Video capture card and I have no documentation, software or drivers for it. I don't even know who makes it. I tried Fusion 878A drivers I found I think on driver guide and they did not work, although they installed with no errors. It has 4 BNC Connectors and 1 RCA Jack.

 

On the board it says:

AVS 4 Channel board V1.1

 

The 4 chips all say the same:

Conexant

Fusion 878A

25878-13

0405y1d4

0406 Taiwan

 

Any Help would be greatly appreciated:

Drivers?

Who makes/distributes this board?

Somewhere to look or a better place to post?

or just any input to get it going, Thanks

 

I have a picture but can't post it being that this is my first post.

Edited December 13, 2008 by Guest

[jay415 0]

Here is a pic

 

And by the way, Yes I am using search feature and ready sticky's I just don't know that much about CCTV products to know if I am looking at the right thing. but again I am trying. Thanks for your patience with me.

Edited December 27, 2008 by Guest

[jay415 0]

OK I got the card up and running with the BT878 drivers in the sticky. But I am only getting 320x240 resolution, and there is an RCA jack that is not working input or output (Don't know if it is an input or output) I am not sure if the resolution is a limitation of the card or that I am using the incorrect driver. Does anyone know? Also I'd really like to know who makes this card and the model, if anyone could help me out there it would be a great help.

[roach 0]

You have the UCC4 4 Port Video Capture Card clone otherwise known as the Pico Card. That's not an "RCA" jack, it is a phono jack for audio.

[jay415 0]

You have the UCC4 4 Port Video Capture Card clone otherwise known as the Pico Card. That's not an "RCA" jack, it is a phono jack for audio.

Thanks

[Soundy 1]

That's not an "RCA" jack, it is a phono jack for audio.

 

It's still an RCA jack.

 

http://en.wikipedia.org/wiki/RCA_connector