bmac67 0 Posted January 1, 2009 Hello, I was wondering if anyone can tell me if these camera's (either the evq-3000 dome or the cvq-2500) will work with any dvr being that they must be programmed via pc (or other) for there setup. When the setup is complete will they function with all DVR's (I have a Integral DVX-500) and was looking to add a few more cameras and these look to be a nice quality addition. I tried covi's site and there is nothing there. Just the fact that GE Securities has bought them, GE's site I couldn't find info. Google just brings up basic info on these camera's. Thank you all very much for your time. Bryan Share this post Link to post Share on other sites
VST_Man 1 Posted January 1, 2009 I've got the evq-1000 dome & box. Both connect via BNC and both require the small "ptz" type programmer. They are "neat" and produce a nice pic. I just could not justify paying the amount of money for them as compared to cheaper analog cameras. I still have these (2) on the shelf since I tested them. I might take them with me when I goto upgrade my favorite client in Florida this month? Share this post Link to post Share on other sites
bigbuilding 0 Posted January 2, 2009 I love the covi cams. From what I heard they are not making them anymore and they are hard to get unless a company had a big stock of them. From what I know should work just the same as any other camera. The PC used to program it would be a laptop running Covi software the would be hooked up to cam at installed position and software just adjusts the position of the bottom 3 images. Share this post Link to post Share on other sites
looksee 0 Posted January 19, 2009 I picked up some Covi CVQ-2500 cameras and need the configuration software to get them on my network. Anyone know where I can find this software??? Share this post Link to post Share on other sites
Cavecreekaz 0 Posted November 6, 2011 Has anyone located or know where to find the Covi "CAMU" software? I have 6 EVQ-1000 cameras but they all seem like the gain is way up and video is washed out. I think I need the software to get them workable again. Here's a you tube video of the software in use. Share this post Link to post Share on other sites
tomcctv 190 Posted November 6, 2011 Has anyone located or know where to find the Covi "CAMU" software? I have 6 EVQ-1000 cameras but they all seem like the gain is way up and video is washed out. I think I need the software to get them workable again. Here's a you tube video of the software in use. Hi covi tech got into problems a few years ago then got took over by GE who passed most of there security products over to UTC Fire & Security but know in the hands of pelco. http://support.pelco.com/view.php?fDocumentId=25276 Share this post Link to post Share on other sites
