jim 0 Posted January 3, 2009 I have a gv data capture box v1.04 & a gv-com box trying to use with a gv650 120 fps ver 5.1 upgraded to 6.1 contacted univision and they can not tell me how to utilize there is no baud rste setting on this box to set with program any help would be appreciated thank you in advance jimh460@aol.com Share this post Link to post Share on other sites
Guest Posted January 4, 2009 HI! Is the GV-Com Box a USB box or? JD I have a gv data capture box v1.04 & a gv-com box trying to use witha gv650 120 fps ver 5.1 upgraded to 6.1 contacted univision and they can not tell me how to utilize there is no baud rste setting on this box to set with program any help would be appreciated thank you in advance jimh460@aol.com Share this post Link to post Share on other sites
Guest Posted January 5, 2009 I am not sure if the GV-USB Com Box works with the 6.1 software! If I was you I would send an email to support@geovision.com.tw and ask, give them info on your card, hw and sw version and they will help you. You where talking about a company called univision, do they have a website? JD Share this post Link to post Share on other sites
Guest Posted January 5, 2009 Hi! How far away is the GV Capture box from your GV PC? JD Share this post Link to post Share on other sites
Guest Posted January 6, 2009 If it is 45 feet as you said you should be able to connect the GV-Data Capture Box directly too your computer COM port and no need for USB Com Box. JD Share this post Link to post Share on other sites
