AVC 773 how to change in/out to PAL video format???

[cubica 0]

Dear friends,

 

please, will you learn me how to change video format on this DVR??? This DVR was damaged, so I have repaire him, it was smd resistor broken 75ohms on the video OUT.

Now, I have this problem, on the start DVR shows screen NTSC ver E63 HDD detected and continue to work under NTSC video format. The consequence is wrong video OUT, input for cameras, also.

 

I can't find anything useful in user manual, do you have any useful info regarding this problem??

 

Thanks in advance, regards,

 

cubica

[todd2 0]

Try this:

 

 

1) Press “POWERâ€

[scorpion 0]

Try this:

 

 

1) Press “POWERâ€

[cubica 0]

A thousand times THANKS friends

I am now out of workshop, tomorrow I will try all you suggested me and post results, of course.

Once more thanks, I am glad and proud to be here with ya!!!!

 

kindly regards,

 

cubica

[cubica 0]

eeehhh... I tried many times with arrows + pw combination, also with or without power cord inserted, but w/o success, unfortunately. Seems, exists other combination to switch to PAL.

 

Is it possible to find service manual for this model?? Also, is it possible to enter service mode???

 

Is there other combination to get PAL system?? Pls, if you know something, share with me.

 

thanks in advance,

 

cubica

[scorpion 0]

http://scorpiontheater.com/Documents/AVTech_Manual_English_AVC773_V1.0.pdf

 

http://scorpiontheater.com/cpcamtechsupport.aspx

[cubica 0]

2.To switch the system, you need to turn off the power and pull out the AC power cord, before you reconnect

the power, press “POWER” + “FF” to NTSC system or “POWER” + “REW” to PAL system and then

reconnect the AC power cord, the DVR will be auto-detecting.

 

 

This is from manual engl vers. you Scorpion gave me address

 

NOW WORKING PERFECT!!!!!!!

 

Thanks Scorpion, todd...

Great regards for you both from Serbia!!!!!

 

cubica