LiThiuM 0 Posted January 23, 2009 ok heres the spec then the problem OS: Xp pro Video card : Ati 1550x Dvr card : Kodicom 4400 MBoard: Asus I run diginet I see the image BUT the image is set still, if i double click on the image it refresh. The thing that IF I go into the diginet motion dector setting, the image is fluid and actualy display in real time what its happening. Tried on two pc and had the same problem on both, the card is good cause we then tried the card on a ubuntu system with another webbased php software and its was #1. If anyone have any idea you are welcome to tried to help ty Share this post Link to post Share on other sites
jetsys 0 Posted January 29, 2009 Hi, there. You need install lower version of video card which is lower than 1050x. or need to install later version of dvr software. Thanks. Share this post Link to post Share on other sites
provision 0 Posted January 31, 2009 the problem is with your VGA card..try ATI radeon 9250 X300 X550 X1050 IT WILL WORK WELL Share this post Link to post Share on other sites
phantomx 0 Posted March 1, 2009 Since ATI X series does not support this card. I dont use any VGA card, only onboard card (intel G31). The software working well (displaying 8 ch video & recording is fine), except now im confused set up the network connection Share this post Link to post Share on other sites
