9-6 0 Posted February 7, 2009 After I remove the four screws, I can't get the collar off. Is it threaded or should it just slip off? In either case, it's frozen. Any tips? I don't want to start prying on it and damage the case. Share this post Link to post Share on other sites
survtech 0 Posted February 8, 2009 After you remove the 4 screws, it should just pull apart. There is probably an o-ring inside that is making it difficult to get apart. Just work a flat head screwdriver around the gap and it should come apart. Share this post Link to post Share on other sites
9-6 0 Posted February 8, 2009 That was the problem. Took quite a bit of "persuasion," but I got it off. Thanks Share this post Link to post Share on other sites
slowforthecones 0 Posted March 19, 2009 #10 sledge hammer... it'll open right up Share this post Link to post Share on other sites
survtech 0 Posted March 19, 2009 By the way, I recommend lubricating the O ring with a bit of silicon grease or equivalent to help prevent that in the future. Share this post Link to post Share on other sites
