bonso 0 Posted February 12, 2009 Hi can anyone give me a idiots guide to setting up dvr for remote viewing. My set up is DVR in the loft attached to wireless ethernet bridge (WET54G) Wireless Bridge to BT broadband hub. DVR - Defult IP is 192.168.1.10 WET54G - Defualt is 192.168.1.225 How do i get all these thingstalking to one another? when they are where does the dnydns info go, in the drv the bridge or the bt hub. I beleive once I have got all this sorted out, then need to do some port forwarding to get to veiw the dvr from the internet. I hope I have covered everything, I have been searching the internet and unless you have a it background the language they are using may just as well be Chinese. Share this post Link to post Share on other sites
coolie11 0 Posted February 12, 2009 1. Configure the Wireless Bridge to connect to your wireless router/access point. 2. Configure Router with DynDns info. 3. Connect DVR to LAN Port of the Wireless Bridge and set a static IP Address within the range of the Router to the DVR. 3. Forward the neccesary ports for your DVR in the Router to the IP Address you used for the DVR. Share this post Link to post Share on other sites
bonso 0 Posted February 13, 2009 Cheers Coolie I will give it a go. Share this post Link to post Share on other sites
