jeromephone 6 Posted February 16, 2009 I am looking at system for no more than 4 doors. I would like it to be programmable from a PC but not have to have a dedicated pc on line all the time. Simpler the better Share this post Link to post Share on other sites
thewireguys 3 Posted February 16, 2009 checkout www.isonas.com They can run in stand alone mode without a pc after you program them. Share this post Link to post Share on other sites
coolie11 0 Posted February 17, 2009 This mite be able to work for you:- http://www.kerisys.com/pages/products/sdac/sdac.asp Share this post Link to post Share on other sites
3RDIGLBL 0 Posted February 18, 2009 This mite be able to work for you:- http://www.kerisys.com/pages/products/sdac/sdac.asp I second a Keri solution. I've installed this: http://www.kerisys.com/pages/products/nxt/NXT-system.asp Used a PC to program it and then can run standalone, however, the customer keeps a PC running in order to have full remote capability. They can add new users from any of there office buildings or from home. They also have full control of the doors from anywhere over IP. Keri has great tech support and they have training for installers as well. They helped me without hesitation for every question I had and I have a happy customer who states it has been running flawlessly. Good luck. Share this post Link to post Share on other sites
Danny 0 Posted June 28, 2009 Keri is a good solution. You can also check out Linears AM3 Plus. Comes out of the gate with four relays. You can add one card reader interface for a total of four readers. Its priced pretty low but is a solid product. they have two different forms of software. One is net based the other is PC based. Share this post Link to post Share on other sites
acx780 0 Posted June 28, 2009 Hopefully you can parlay your customer into more than four doors and if you can and you buy the right software this platform can grow easily. Share this post Link to post Share on other sites
