DewBoyOne 0 Posted February 18, 2009 Hi all, I can't seem to upload video file for everyone to see??? First time posting anything in a forum that might be why well I have come across an issue I can't seem to correct 100%. That is why I am reaching out to you guys. Please review attached file and let me know what is causing intermittent video lose and Rolling Ghost Lines. I have 2- CBIV8948H-49 DSP Color Day/Night Cameras, & 2- 27X Optical zoom 1/4" Super HAD CCD Cameras. All 4 Cameras are wired using Siamese RG59 to a 4x4x4 PVC Junction box connected to a VA-404 Video amplifier, On output side of VA-404 we have a 6" RG59 Pigtail Connected to VBS-1 Video Balun converted to Flooded UTP CAT5e (all 4 channels on single CAT5e cable) Approx. 550FT. to VBS-1 Video Balun to a MX Series DVR (046 (EG) 4 Channel MPEG DVR W/ CDRW). I would like to thank you in advance for taking the time out to read & reply to this post. Share this post Link to post Share on other sites
fullvision 0 Posted February 21, 2009 1. set initialization, 2. change a HDD. That`s the two normal problem. But I don`t know which kind of dvr you have. I think that maybe something wrong with the software. I don`t think our software is suit for your products. But if you want to have a try, you can send me message for our software. Share this post Link to post Share on other sites
Media 0 Posted March 18, 2009 It's for sure not a hard drive problem or software problem. It's got to do with your installation setup it's either the cable, connection or , camera, power supply or DVR card is blown. This problem is actually not rare but it can be any of listed above. Share this post Link to post Share on other sites
