bpzle 0 Posted February 26, 2009 OK, let me first start by saying most of you pros will laugh at most of my equipment but in my defense I'm very proud of my creativity given my tight budget. So, I own a 19" LCD 8 channel DVR combo unit made by Lorex, model SG19LD800 (bought off Craigslist for $400 in “almost new†Share this post Link to post Share on other sites
UMDRanger 0 Posted March 2, 2009 I had a similiar problem. I tried to use my Geovision GV-Net to control a AD SpeedDome IV. Had all the settings right, tried changing them, all to no avail. Took it to my job where we use AD controllers... works like a charm. Now I just have to get the fan from cycling on and "buuzzrrrrrrrrrr" every few seconds. I think some WD-40 on the fan assembly will do it. Worked to relube my PC fan. But I am sorry, I have no explaination for the lack of comms. But it may just need an actual AD controller. Share this post Link to post Share on other sites
bpzle 0 Posted March 16, 2009 I'm sad I havn't gotten any worthwile responses... I've ordered a RS232 to RS422 adapter from Ebay. It should be here any day. Anyone have a copy of Sensormatic Hex code commands? Share this post Link to post Share on other sites
sfjensen 0 Posted March 20, 2009 You might want to check out this software, they have a trail version that may help you sove the problem. http://www.232analyzer.com/RS232_Protocol_Analyzer_Monitor/RS232_Analyzer_Monitor_DOWNLOAD.HTM Share this post Link to post Share on other sites