secureconcepts 0 Posted March 9, 2009 posted this one before but for some reason it's gone .... Already working with Geovison on this, just want to know if I am the only one: - DVR (8.3) connected to CV2 (8.3) - system gets instable: lost feeds to CV2 and multiple restarts on the DVR Same CV2 has NVR (8.3) connected: no problems and other 8.2 DVR's with no problems. Any input of similar setups would be helpfull to find a solution. Share this post Link to post Share on other sites
secureconcepts 0 Posted March 9, 2009 or if someone has a 8.3 DVR test-system, they could connect to my Center V2. This way I can see if it happens with other systems as well. Share this post Link to post Share on other sites
rara1386 0 Posted March 24, 2009 I have a DVR system with CV2. If we can be of some help, please let me know. Best regards, Share this post Link to post Share on other sites
secureconcepts 0 Posted April 7, 2009 apperently the problem occurs when you connect to two CV2-systems. With one it's stable. They still have not figured out what the problem is at GV. Already did a complete OS install upgrade the memory, nothing helps. System keeps restarting and looses CV2 connection. GV is unable to reproduce the problem, if somebody has 8.3 (vista) and could just try to connect to two CV2-systems.......and keep it running (should happen witin hours). This system has 10 cams (1480 PCI-X) and one 3 mp cam (but with 10 analog cam's the problems are the same). p.s. system used to run 8.2 (same setup): did run perfect Share this post Link to post Share on other sites
secureconcepts 0 Posted April 27, 2009 solved in 8.31 Share this post Link to post Share on other sites
