jeremy160 0 Posted March 9, 2009 I recently purchased a simple wired cctv surveillance camera. Installing it was no problem. I needed 30 meters of wire from my front door to my tv set. In between i had to add some wire so i therefore soldered some lengths. The camera works well. Even the sound. BUT i am constantly getting these two fuzzy lines on the screen which keep on going up and down the screen. They are very annoying. Is it maybe due to the fact that the wire is 30 meters long? The camera does actually work well because when i directly connected it to my tv it was 100% clear!. Or maybe is it the type of wire i used for it? (i used phone wire as it has 4 wires. I used 2 for video and 2 for audio). I am really frustrated. Can anyone help me and guide me on how to resolve this problem? Share this post Link to post Share on other sites
scorpion 0 Posted March 9, 2009 Try a shielded wire instead to protect the video signal. Share this post Link to post Share on other sites
