tbrennan 0 Posted March 21, 2009 Hello, I have Video Feeds from two cameras, Could I use a A/V Splitter "Y" to split the feeds to go to two sources? One of these Feeds/Cameras has a RCA Male & One has a RCA Female Thanks! -Tbrennan Share this post Link to post Share on other sites
survtech 0 Posted March 21, 2009 It is not good practice to passively "split" a video signal. The result will be dark and probably exhibit severe ghosting. Use video distribution amplifier(s). Share this post Link to post Share on other sites
C7 in CA 0 Posted March 21, 2009 I'm curious; Are "loop out" connections on the back of DVR's always amp'd? sometimes amp'd, rarely amp'd, never amp'd? Share this post Link to post Share on other sites
kensplace 0 Posted March 21, 2009 THe only ones I have seen have all been non-amplified, simply looped the input signal straight back out...... But I have not used that many DVRS. Never had a problem with splitting the signal by looping out on the back of a multiplexer or dvr - but all have been fairly short cables.... Share this post Link to post Share on other sites
ak357 0 Posted March 21, 2009 THe only ones I have seen have all been non-amplified, simply looped the input signal straight back out...... But I have not used that many DVRS. Never had a problem with splitting the signal by looping out on the back of a multiplexer or dvr - but all have been fairly short cables.... I am not to shure if i agree so far they all have buffer stage to assure 75 oms load matching Share this post Link to post Share on other sites
