imsoco 0 Posted April 8, 2009 After years of trying to handle this problem, we are back to square one. The Dedicated Micros 16 channel Sprite 2 DVR will freeze up, randomly display cameras within the quad view mode, then display random cameras when selecting the same camera number. It has been sent back to service many times, boards have been replaced and even the whole unit replaced. Currently, the service department says it cannot find any problem. We duplicated the problem here in our office after removing from the clients house. It went back, they said no problem was found and it was returned. Again it was sent back, this time with a DVD showing what the DVR is displaying. Again it was returned with no problem found. The service department said "what DVD?". We are still searching out the possible source of the problem in the external environment as well. Any suggestions would be appreciated. If you have seen this problem before, please share. I posted the videos of the display on the web, but since I am new here, I cannot post that link. Reply and I'll email the link. Share this post Link to post Share on other sites
Sawbones 0 Posted April 8, 2009 Never seen that particular glitch. Share this post Link to post Share on other sites
imsoco 0 Posted April 8, 2009 Thanks for your response. We verified the camera lines to see there was not any spurious currents running on the video input wiring. I had a lot of confidence in the DedMic product up until this unit. Share this post Link to post Share on other sites
