Help with cms3000 and Aver6480ex

[golden1967 0]

Hoping someone can answer this-I am looking to use an Averdigi 6480ex dvr server to alert a remote location, for motion detection, in a secure area. I wanted to send video from the motion sensitive area with a specific "intruder alert" to a client on the network running the cms3000 application. Going through the options in the manual,(it hasn't been deployed yet) it isn't clear how the audio alert clip would go to the cms3000 client from the dvr server. Do you have to set up the cms3000 alarm options, to play the specific audio alert clip? Or does it get sent with video through the, send live video to cms option from the dvr server, alarm action options?

 

 

Thanks...............Mark

[golden1967 0]

Got my answer from Avermedia, the dvr will play the audio alert through to the CM3000 remote client.

 

First set up the dvr properly,

 

You will need to setup an alarm trigger to send an alert to the cm3000.

 

Click on Setup->Alarm.

Click on the Add button to create a new alarm.

Under Camera select the cameras you wish motion to trigger the alarm.

Under actions click the option "Send to CMS"

Click on the details button next to the "Send to CMS" option and select the

cameras you wish to transmit.

Click the OK button to save the settings.

 

 

Now that the dvr is set up properly, you will need to setup the CM3000

 

Launch the CMS3000 software.

Click on Setup-> Alarm.

Under Conditions, click on the Select DVR button.

Select the DVR from the left windows option, then click on the Add button.

It should be now displayed on the right side of the window. Click th eOK

button.

Under Alarm, check off Receive alarm.

Under Action, you can setup audio alerts as well as pop up videos. Once you

have setup your actions, you can click on the OK button to save the settings.