The Patman 0 Posted May 24, 2009 GeoVision 8.12, 8 input GV1240. We've been running a Pelco-D for a year now on a 6 position preset tour, setup in the "PTZ mapping" menu. After 30 seconds of inactivity it starts it's tour. Works as advertised. Last week, after we finally completed the new building addition, I added two more PTZ domes, same manufacturer, same model, same setup, same weight, color, style, same shipping box. Both installations went smooth as silk. Set 5 presets on one, and 12 presets on the other. Both new cams work fine from the PTZ panel, and both slew to any preset I choose ( all the while the first is happily running it's tour on cam 1). The problem is one of the two new cams will follow it's preset tour till the last preset (#5), then stop. After 30 seconds, it will start over, but will not do a continuous tour. The other new cam wont do a preset tour at all. It just sits, unless I tell it to move, then it does so instantly and without issue. All three have mapped addresses, and all three work with manual selection of presets. one does a perfect round the clock tour, one tours then stops for 30 seconds ( the setting for inactivity) and the third wount run it's tour at all. What gives? We have a hightened level of security coming up in a week, and help would be great. Share this post Link to post Share on other sites
