cableguy 0 Posted May 25, 2009 Hello guys Do you have any good seller for Thermal Cameras ? (not PTZ) and also a nice proffessional software that can support them. Also because the network will be made by fiber optics do you have something in mind that i can take care of it ? They will be about 120+ camera few thermals and whole perimeter is about 6meters. regards Share this post Link to post Share on other sites
zmxtech 0 Posted May 25, 2009 6m ? 6 miles ? I think your network will be made from switches and routers not fibre. using fibre to transport the "network" yes? single mode GB connections will do the trick. I like the idea of "thermal domes" you can get now. tho have not played with them. what software do you need ? [motion detection and heat alarms?] http://www.zmx.com.au/thermal.htm you could RADAR control the system then you only need a few cams and a high quality PTZ http://www.zmx.com.au/radar.htm Its expensive stuff but might give you some ideas.... z Share this post Link to post Share on other sites
cableguy 0 Posted May 25, 2009 6m ? 6 miles ? I think your network will be made from switches and routers not fibre. using fibre to transport the "network" yes? single mode GB connections will do the trick. I like the idea of "thermal domes" you can get now. tho have not played with them. what software do you need ? [motion detection and heat alarms?] http://www.zmx.com.au/thermal.htm you could RADAR control the system then you only need a few cams and a high quality PTZ http://www.zmx.com.au/radar.htm Its expensive stuff but might give you some ideas.... z omg i was meaning about 6khm The customer dont care about the cost that much..... because he want about 8 thermal camera. Also he dont want any copper cable in the network expept those in the Control room........ I think the software must got some thermal alarms, and also can handle few high quality analogue camera and also motion detection. Thx alot for the info i am checking it right now. Share this post Link to post Share on other sites
Biphase 0 Posted August 15, 2009 A Bosch MIC Thermal camera is good. Share this post Link to post Share on other sites
VOSCOM 0 Posted September 16, 2009 Fiber optics? Opticomm,VOSCOM,Lasscom,OSD,PELCO...etc Share this post Link to post Share on other sites
kensplace 0 Posted September 17, 2009 Yup, the mickeys (bosch, formerly forward vision) have a great reputation apparently. There is also a new range of thermal cameras from http://www.melsecuresystems.co.uk/ never used them, just seen them mentioned in a issue of a uk security trade magazine. Share this post Link to post Share on other sites
Soundy 1 Posted September 17, 2009 We've use FLIR thermal cameras on a site, they work great. They have a "Wide-Eye" model that will give a full 180-degree view, plus various dome models. www.flir.com Share this post Link to post Share on other sites