johnt1 0 Posted May 25, 2009 I was playing with the settings on my AVTECH dvr and changed the network to DNNS and now I cannot log on to the recorder. Is there away to reset the dvr to factory defaults? Thanks, John Share this post Link to post Share on other sites
scorpion 0 Posted May 25, 2009 I am not quite sure what problem you have. I was under the impression that you could not connect to the DVR, but you are remote viewing the DVR. If you want to reset the DVR then you can just go in to MENU > ADVANCED > NETWORK, and you can reset the IP address so that you can log in to the DVR via the internet. If you still want to reset the DVR send me a 99 cents, and go here: http://scorpiontheater.com/reset.aspx Share this post Link to post Share on other sites
johnt1 0 Posted May 26, 2009 Thanks for replying. After I changed the IP from static to DDNS I closed the DVR software and now am not able to log back in. I did not know if there was a way to reset the dvr manually so that it would go back to the original settings. I tried the default un/pw (admin/admin) but neither my old password nor the default worked. It had started to act funny before this anyway and would not let me rewind and view old footage so I was just going to erase everything and start over. John Share this post Link to post Share on other sites
johnt1 0 Posted May 26, 2009 What do you mean by send you a 99 cents? I see the jumper instructions - that is what I need. Share this post Link to post Share on other sites
scorpion 0 Posted May 26, 2009 I am sorry! The 99 cents was a just a joke! I meant 99 thousand dollars! Yes, that is what I really meant! Take care! Share this post Link to post Share on other sites
johnt1 0 Posted May 26, 2009 Thanks scorpion for your help. If I had the $99,000 I would give it to you. The headache I have had from trying to figure this out would have been worth it. Thanks again, John Share this post Link to post Share on other sites
