Can't log through internet explorer's (Geovision Server?)

[dmor 0]

A couple of months ago I had to reinstall the OS on my home computer. Prior to that with the GV 800 I could view my system remotely from work or anywhere via liveview or Multiview. I had cable for internet then.

Since then and after the reinstallation I have DSL not wireless and I can view my cameras remotely but one thing I can't do now is enter my ip into internet explorer and have the Geovision log in window come up. I could have missed installing something that is key to being able to do that and I have tried everything I know and have went through the manual with no luck.

 

I am using the 8.2 version. Thanks

[ilkevinli 0]

Make sure you are putting the port number at the end. It should look like this:

 

http://192.168.1.15:2000

 

Or your trying from outside your house:

 

Http://65.65.65.65:2000

[dmor 0]

Make sure you are putting the port number at the end. It should look like this:

 

http://192.168.1.15:2000

 

Or your trying from outside your house:

 

Http://65.65.65.65:2000

 

I never had to do that before. I could give anyone my ip address over the phone and have them log on.

 

However, if anything has changed, where would I look for the port number?

 

Thanks

[ilkevinli 0]

Click on "Network" and then "Network Port Information" and then "Webcam Server". It would be the Http port number

 

 

 

 

 

Make sure you are putting the port number at the end. It should look like this:

 

http://192.168.1.15:2000

 

Or your trying from outside your house:

 

Http://65.65.65.65:2000

 

I never had to do that before. I could give anyone my ip address over the phone and have them log on.

 

However, if anything has changed, where would I look for the port number?

 

Thanks

[dmor 0]

Thanks very much for you help. That did it.