pedro77 0 Posted June 7, 2009 Hi guys, I got this 16 channel Sprite 2 as it was faulty. It powers up fine and gives me access to all the menu functions and i've even had it displaying the cameras for 5 mins BUT Generally and now permanently the screen is full of green and blue lines. The menu comes on over this. Read much of your discussions about changing hard drives, where the operating system is held etc but i'm unsure whether the drives need changing. It boots ok and checks and passes the drive (160G). could it be the operating system? Any help would be appreciated. it's a 16 channel and would be a shame to waste it. Spoke to dedicated micros today and they suggest its the video output that's gone which will be off the PCB. When I asked if it could be fixed the guy said "oh yes" but didnt have any prices. diff department. doubt will be cheap Share this post Link to post Share on other sites
