Jump to content
Imager

Need Datasheets, Sony CXD3172AR and ICX638AKA any HQ1 docs

Recommended Posts

I need the datasheets for Sony CXD3172AR and ICX638AKA or any other HQ1 documents for a design I am working on, for a low volume specialty application. Can anyone provide these, I have some docs to provide in trade.

Share this post


Link to post
Share on other sites

http://scorpiontheater.com/camlab.aspx

 

 

Sony Super Had II PDF

 

http://www.sony.net/Products/SC-HP/cx_news/vol52/pdf/featuring52.pdf

 

 

 

There are no PDF for the CXD3172AR that I am aware of.

http://www.sony.co.jp/~semicon/english/90205.html

 

CXD3172AR

Signal Processor LSI for Single CCD Color Camera

Description

100 pin LQFP (Plastic)

The CXD3172AR is a signal processor LSI for Ye,

Cy, Mg and G single CCD color cameras. In addition

to basic camera signal processing functions, it

includes an AE/AWB detection circuit, a sync signal

generation circuit and an external sync circuit, etc.

This chip also has a built-in microcontroller to realize

basic camera functions such as AE/AWB without an

external microcomputer.

Features

Absolute Maximum Ratings

* Generates timing pulses to drive the single CCD

* Supply voltage VDD VSS – 0.5 to +4.6 V

image sensor

SS – 0.5 to +4.6 V

AVD V

Built-in H/V driver for CCD image sensor

VH VL – 0.5 to VL + 26.0 V

VM VL – 0.5 to VL + 26.0 V

Luminance/chroma signal processing

* Input voltage VI VSS – 0.5 to VDD + 0.5 V

* Supports NTSC/PAL modes

O VSS – 0.5 to VDD + 0.5 V

* Output voltage V

* Supports 510H/760H system CCD image sensor

* Operating Temperature

* Built-in 10-bit A/D converter

Topr –20 to +75 °C

* Built-in EVR (3ch)

* Storage Temperature

Tstg –55 to +150 °C

* Analog composite output

— Built-in digital encoder

Recommended Operating Conditions

— 10-bit D/A converter output

* Supply voltage V

DD 3.0 to 3.6 V

* Digital output

AVD1, 3, 4, 5, 6

— Conforms to ITU-REC656/ITU-REC601 format

3.0 to 3.6 V

AVD2 3.0 to 5.5 V

* Supports external sync functions

VH 11.64 to 15.45 V

— Sync separation circuit

VL –7.5 to –4.5 V

— Phase comparator

VM 0 V

* AE/AWB detector

* Operating Temperature

* Block control functions with a built-in microcontroller

Topr –20 to +75 °C

— AE/AWB/CLAMP/Blemish detection and

Applicable CCD Image Sensors*

compensation

* 510H color CCDs

* Peripheral IC control function

(Type 1/3, 1/4, NTSC/PAL)

— EVR/EEPROM communication control

* 760H color CCDs

* Serial communication function (2 mode selection)

(Type 1/3, 1/4, NTSC/PAL)

— Microcomputer communication/start-stop

Supported Relates LSIs

synchronous system communication (RS232C)

AGC CXA2096N

* Auto blemish detection and compensation function

EVR MB88347 (Fujitsu Limited.)

* Mirror function

EEPROM AK6480A

(Asahi Kasei Microsystems Co.,Ltd.)

BR9080A (ROHM)

Applications

* Industrial CCD cameras

*

Applicable CCD image sensors are applicable

(Surveillance/FA/image input cameras)

products as of preparing this data sheet.

* Multimedia CCD cameras

They may be changed according to the version up

(Teleconferencing/personal computer cameras)

and production stop of CCD image sensor.

Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by

any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the

operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×