tlawrence 0 Posted July 10, 2009 just wondered if anyone knows how to stop this? When you select a a new camera to be shown on the monitor, the new image "jumps" for a second before settling into a good image. this also happens when its on sequance. I have sorted this problem many years ago, but I cant remember how to do it again!!! I think its something to do with the sync, but hopefully someone can tell me how we can get a "seemless" switch between cameras on the monitors. Thank you. Share this post Link to post Share on other sites
Squiffy 0 Posted July 10, 2009 It sounds like you have a simple switcher rather than a multiplexer. The problem is indeed the vertical sync. Either the sources need to be in synch (genlocked) or the switcher needs circuitry to overcome this. Some monitors are better than others in relocking to new synch, so it may be an annoying problem on one and tolerable on another. Share this post Link to post Share on other sites
tlawrence 0 Posted July 10, 2009 Thanks Squiffy. In fact the system is a DM sprite 2 that has all its cameras fed into our Crestron system. The pictures are viewable on touchscreens all around the house and the DM can be controlled from each touchscreen with correct access rights. I will look into the sync issue a bit more. thanks Share this post Link to post Share on other sites
jbooth1 0 Posted July 16, 2009 Do all of your cameras get its power from the same source. I have also seen this happen with phase imbalance. Share this post Link to post Share on other sites
